These two Omni*Hub spaceframe systems and sloped glazing create an entranceway identification for the 22-story Banco Popular Building in Hato Rey, Puerto Rico. The bank’s headquarters uses our sloped canopy with glazing to create a covering of the lowest entranceway of the bank and covers the outdoor restaurant area with the beauty of the spaceframe […]
An entranceway canopy for the Bascom Palmer Eye Institute in Miami, FL The canopy at this leading eye center provides an architectural statement for the building and features the Omni*Hub Type A System, i.e. rectangular top members. This provides the architect with the beauty of a clean interface with our continuous acrylic skylight system – […]
This 8′ X 24′ canopy is an architectural statement with the spaceframe system and Sunglow skylights which form the entranceway on this refurbished office building in Staten Island, New York. The spaceframe is mounted on concrete columns at two points and the elegance of the system is emphasized. The spaceframe consists of 12 modules and […]
This glazed canopy spaceframe gives a clean, sharp lined finishing touch to the entranceway to Bell Laboratories Research Facilities. One unique feature is the use of only two columns to support the spaceframe. The result is an exciting design that makes the spaceframe appear as if it is floating in space. The Geo*Hub is advantageous […]
This is the second Geo*Hub System added on to the Blount Memorial Hospital in Maryville, TN. The previous project #1369 in 1983 featured a similar triangular plan with a pyramid acrylic skylight. The low maintenance cost of an aluminum system and the clean lines of the skylight system attached directly to the top structure was […]
Bradley International Airport has expanded their parking garage facilities. CST has built canopies for the tollbooths located at the exits. This unique design of skewed and undulating arches creates an interesting form and adds a signature to the extension. The design truly shows the flexibility of the Omni*Hub spaceframe system when it comes to shape […]
This Omni*Hub spaceframe at the Bridgeport Center is a unique double curved section of a cone tilted at a 16.113 degree angle. The glass glazed atrium opens the atrium area to the sky above in a very dramatic way as you walk in the building. The well-known architect, Richard Meier used a curved bank of […]
Conservatek provided a distinctive entranceway for the new Caguas Mall in Caguas, Puerto Rico using our Omni*Hub system on a 9′ x 9′ module size supported on two columns. The Omni*Hub spaceframe included a mullion and decking system upon which cladding was added and set on top of a column with a type of X-brace […]
Conservatek provided a value engineered, fast track project for the State of CA for the West Gate Entranceway of the CA State Fairgrounds in Sacramento. This project was initially designed around a standard 5′ module Unistrut standard unit for spaceframe and Conservatek was able to save the State of CA almost $50,000 by converting this […]
This Omni*Hub spaceframe canopy at the Sumitomo Light Metals Chiba Plant is the second project of the Conservatek/SLM Joint Venture in the Japanese market. The 1.91 meter X 1.9 meter module spaceframe creates a 131’/40 meter X 46’/14 meter cover with a metal deck roof. The structure was assembled on the ground in two sections, […]